Schedule IV

(See rule – 11)

Exceptions referred to in rule 11.

 

1.         The following commodities may be sold by weight, measure or number as sown against the commodity

 

TABLE

 

Sl. No.

Commodity

Whether declaration to be expresses in terms of weight, measure, or number or two or more of them.

1.

Aerosol products

Weight

2.

Acids in Liquid from

weight  or volume

3.

Compressed or liquefied

Gas(but not LPG)

Weight and equivalent volume at stated temperature and pressure

4.

Butter(incl Peanut butter),

Cheese, Curd, Ghee

Weight

5.

Electric cables

Length or Weight

6.

Electric wire

Length or Weight

7.

Fencing wire

Length or Weight

8.

Hair Oil, unperfumed

Weight

9.

Fruits and Vegetables

Weight or number

10.

Furnace Oil

Weight or volume

11.

Linseed Oil and other

Vegetable Oils

Weight

12.

Heavy residual fuel Oil

Weight

13.

Industrial diesel fuel

Weight

14.

Honey, malt extract,

Golden syrup treacle

Weight

15.

Ice Cream and other

Similar frozen products

Weight or volume

16.

Liquid chemicals

Weight or volume

17.

LPG

Weight

18.

Nails, wood screws

Weight or number

19.

Paint (Other than paste

Paints or solid panint)

Volume

20.

Papad

Number and weight

21.

Paste  paint, solid paint

Weight

22.

Rassogulla, Gulabjamun

And other sweet preparations

Weight

23.

Sauce, all kinds

Number and size

24.

Sauce, all kinds

Weight

25.

Tyres and tubese

Number

26.

Yarn

Weight or length of yarn

                             







































 


 

SCHEDULE-VA

(See rule 12(1))

                                                   FORM-LM-1                

(Application Form for License as Manufacturer of Weights, Measures under the Standards of Weights and Measures (Enforcement) Act, 1985)                                                                        

To

To be filled by  The applicants

Comments of the                          Inspection Office

1

2

3

1.  Name of the manufacturing concern for     Which licence is desired.

 

 

2. (a) Complete address of the concern.

    (b) Whether premises are owned/rented/Taken on   lease/leave licence, duly supported by documents.

 

 

3. Date of establishment of workshop/factory

 

 

4. Name(s) and address(s) along with their father’s /husband’s name of Proprietor(s) and/or Partners and Managing Director(s) in the case Of Limited company.

 

 

5. The date and current registration number of factory/shop/establishment/Municipal Trade Licence

 

 

6. Nature of manufacturing activities at present:

 

 

7. The type of Weights and measures proposed to be manufactured Viz:

(i)   Weights

(ii)  Measures

(iii) Weighing Instruments

(iv)Measuring Instruments

with details in each case.

 

 

8. The number of persons employed/proposed to be employed:

(i)                  Skilled

(ii)                Semi-skilled

(iii)               Unskilled

(iv)              Specialist trained in the line

9. The monogram or trade mark intended to be imprinted on weights and measures to be manufactured.

 

 

10. Details of machinery, tools, accessories, owned  and used for manufacturing weights, measures etc.

 

 

11. Details of foundry/workshop facilities arranged.  Whether ownership, long term lease etc.

 

 

12. Facilities of steel casting and hardness testing of vital parts.

 

 

13.Availability of electric energy?

 

 

14.Details of loan received from Government or financial Institution.

 

 

15.Name of bankers, if any?

 

 

16.Sales Tax Registration Number / IT Number Professional Tax registration Number  / IT Number.

 

 

17.Have you applied previously for a manufacturer’s licence? If so, when and with what results?

 

 

18   .(a) Whether the item(s) proposed to be        manufactured will be  sold within the State or out side the State or both.

 

 

(b)    Details of Model Approval received from Government of India; orWhen can you produce for inspection samples of your products for which licence is desired?

 

 

 

 

                                               To be certified by the applicant

 

     Certified that I/we have read the Standards of Weights and Measures Act, 1976, the Standards of Weights and Measures (Enforcement) Act, 1985 and the Delhi Standards of Weights and Measures (Enforcement) Rules 1988 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under.

 

 

           I/We agree to deposit the scheduled licence fees with Government as soon as required to do so by the Licensing Authority.

 

           All the information furnished above is true to the best of my/our knowledge

 

Place:

 

Date:

 

                                                                     Signature and Designation

 

             To be filled in by Departmental Officer of the State Government

 

Date of receipt of application:

Serial Number of application:

Date of inspection:

Recommendation of Inspecting Officer

 

Place:

Date:

                                     Signature and Designation of Inspecting Officer

 

                                       Final orders of Licensing Authority

Licence granted/refused:

Licence Number

Valid till:

Place:

Date:

 

 

                                                          Signature and Designation

    .

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SCHEDULE-VA

(See rule 12(1))

FORM-LR-1

 

(Application Form for License as Repairers of Weights, Measures under the Standards of Weights and Measures (Enforcement) Act, 1985)

                                             

To

 

 

 

To be filled by  The applicants                                                

Comments of the Inspection Officer

1. Name of the repairing concern seeking the licence.

 

 

2. Complete address of the workshop.

 

 

3. (a) Whether premises are owned/rented/taken on lease/ leave licence duly supported by documents

(b) Date of establishment

 

 

 

4. Name(s) and address(s) along with father’s /husband’s name  of proprietor(s) and/or partners and Managing Director(s)  in the case of Limited company.

 

 

5.  Number and date of shop/establishment/current Municipal Trade Licence.

 

 

6.  Professional Tax/IT Tax registration Number.

 

 

7.  The type of Weights and measures proposed to repaired.

 

 

8.  Area in which you wish to operate.

 

 

9.  Previous experience in the line.

 

 

10.Number of skilled staff employed or proposed  to be employed

   (a)  Skilled

   (b)  Semi-skilled

   (c)  Unskilled

   (d)  Employees trained in the line

 

 

11. Details of machinery/tools/accessories available.

 

 

12. Availability of electric energy.

 

 

13. Have you sufficient stock of loan/test weights, etc?  Give details.

 

 

14. Have you applied previously for a repairer’s licence? If so, when and with what results?

 

 

          

 

 

                             To be certified by the applicant

                                                                                                                                

     Certified that I/we have read the Standards of Weights and Measures Act, 1976, the Standards of Weights and Measures (Enforcement) Act, 1985 and the Delhi Standards of Weights and Measures (Enforcement) Rules 1988 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under.

 

     I/we agree to deposit the scheduled licence fees with Government as soon as required to do so by the Licensing Authority.

 

     All the information furnished above is true to the best of my/our knowledge.

 

Place:

 

Date:

 

                                                                                                      Signature and Designation

 

To be filled in by Departmental Officer of the State Government

 

Date of receipt of application:

Serial Number of application:

Date of inspection:

Recommendation of Inspecting Officer:

 

Place:

Date:

 

 

                                                      Signature and Designation of Inspecting Office

 

                                                    Final orders of Licensing Authority

 

Licence granted/refused:

Licence Number:

Valid till:

 

 

Place:

Date:

 

 

                                                      Signature and Designation

 

 

 

 

 

SCHEDULE-VA

(See rule 12(1))

FORM-LD-1

 

(Application Form for License as Dealers in Weights, Measures under the Standards of Weights and Measures (Enforcement) Act, 1985)

 

                                            

To

 

 

 

To be filled by  The applicants                                                

Comments of the Inspection Officer

1.  Name of the establishment/shop/person      seeking the licence.

 

 

2.   (a) Complete address of the  establishment /  shop /person.

 (b) Whether the premises are owned / rented /  taken on lease/leave licence, duly supported by documents.

 

 

3.  Date of establishment.

 

 

4.  Name(s) and address(s) along with father’s / husband’s name of Proprietor(s) and/or Partners and Managing Director(s) in The case of Limited company.

 

 

5  .Number and date of Registration Number of current shop/

     Establishment/Municipal Trade Licence.

 

 

6  .Categories of weights and measures  sold/proposed to be sold at present.

 

 

7.  Registration Number of CST/Sales  Tax/Professional Tax/Income Tax.

 

 

8.   Do you intend to import weights, etc from   places outside the State/Country?

If so, indicate sources of supply. (Give details of manufacturers trade

      Mark/monogram and his licence number)

 

 

9.   Have you applied previously for a dealer’s licence, either in this State or elsewhere?  If so, give details?

 

 

 

                                            

                        

 

 

 

 

 

To be certified by the applicant

 

     Certified that I/We have read the Standards of Weights and Measures Act, 1976, the Standards of Weights and Measures (Enforcement) Act, 1985 and the Delhi Standards of Weights and Measures (Enforcement) Rules, 1988 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under.

 

     I/We agree to deposit the scheduled licence fee with Government as soon as required to do so by the Licensing Authority

 

      All the information furnished above is true to the best of my/our knowledge.

 

Place:

Date:

 

                                                                  Signature and Designation

 

                   To be filled in by Departmental Officer of the State Government

 

Date of receipt of application:

Serial Number of application:

Date of inspection:

Recommendation of Inspecting Officer:

 

 

Place:

 

Date:

 

                                                                Signature and Designation of Inspecting Officer

 

                          

                                  

                                        Final orders of Licensing Authority

 

                                                        

Licence granted/refused:

Licence Number:

Valid till:

 

Place:

Date:

 

 

                                                                        Signature and Designation

                                                                      

 

 

 

 

 

 

                        SCHEDULE-V B                         

(See rule 12(1))

FORM-LM-2

(Application for renewal of Licence as Manufacturer of Weights, Measures under the Standards of Weights and Measures (Enforcement) Act, 1985)

 

To

 

 

 

To be filled by  The applicants                                                

Comments of the Inspection Officer

1.  Name and complete address of the manufacturing concern for which renewal of licence is desired.

 

 

2.  Manufacturing Licence No.

 

 

3.   Name(s) and address(s) along with    father’s/husband’s name of proprietor(s) and/or Partners and Managing Director(s) In the case of Limited company.

 

 

4.  (a) Type of weights and measures which are manufactured  as per licence granted

    (b) Do you propose any change

 

 

5.  The monogram or trade marks used on Weights and measures Manufactured by you:

 

 

6  .Details of workshop facilities available.

 

 

7.  Details of production and sales in the last 5  years

 

 

8.  Number and date of shop/establishment Registration Number

 

 

9  .Registration Number of Sales Tax/CST/Professional Tax/Income Tax:

 

 

 

                                    To be certified by the applicant

 

            Certified that I/We read the Standards of Weights and Measures Act, 1976, the Standards of  Weights and Measures (Enforcement) Act, 1985 and the Delhi Standards of Weights and Measures (Enforcement) Rules, 1988 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under.

 

            I/We have deposited the scheduled licence fees of Rs…………..(Rupees………….) to  the Sub-Treasury/Bank on……….. and the original challans is enclosed.

 

            All the information furnished above is true to the best of my/our knowledge

 

Place:

Date

                                                                                 Signature and Designation

 

SCHEDULE-V B

(See rule 12(1)

FORM-LR-2

(Application for renewal of Licence as Repairers of Weights, Measures under the Standards of Weights and Measures (Enforcement) Act, 1985)

 

To

 

 

 

To be filled by  The applicants                                                

Comments of the Inspection Officer

1.  Name and complete address of the repairing

      concern /person seeking renewal of the Licence.

 

 

2  .Repairer’s Licence Number..

 

 

3  .Name(s) and address(s) along with father’s / husband’s name of proprietor(s) and/or Partners and Managing Director(s) in the case of Limited company.

 

 

4.   Registration Number and date of current shop/establishment/ Municipal Trade Licence.

 

 

5   .Registration Number of Sales Tax/Profession Tax/Income Tax.

 

 

6.   (a)  The type of Weights and measures repaired  as per  Licence granted

     (b)  Do you propose any change

 

 

7.  Details of repair works done in the last 5 years

 

 

8.  Area in which you are operating

 

 

9.  Have you sufficient stock of loan/test weights, etc?

 

 

10. Please give details with particulars of stamping

 

 

 

                                       To be certified by the applicant

 

            Certified that I/We have read the Standards of Weights and Measures Act, 1976, the Standards of Weights and Measures (Enforcement) Act, 1985 and the Delhi Standards of Weights and Measures (Enforcement) Rules, 1988 and to agree to abide by the same and also the administrative orders and instructions issued to be issued there under.

 

            I/We have deposited the scheduled licence fees of Rs……….(Rupees………..) to the sub-Treasury/Bank on………….. and the original challans is enclosed.

 

            All the information furnished above is true to the best of my/our knowledge.

 

Place:

Date:

 

                                                                       Signature and Designation

 

SCHEDULE-V B

(See rule 12(1))

FORM-LD-2

 

(Application for renewal of the Licence as Dealers in Weights, Measures under the Standards of  Weights and Measures (Enforcement) Act, 1985)

 

 

To

 

 

 

To be filled by  The applicants                                                

Comments of the Inspection Officer

1. Name of the establishment/shop/person

    Seeking the renewal of licence.

 

 

2. Dealer’s Licence Number.

 

 

3. Date of establishment.

 

 

4. Name(s) and address(s) along with     father’s/husband’s name, of proprietor(s) and/or partners and Managing Director(s) In the case of Limited company.

 

 

5.Registration Number and date of shop/establishment/ Current Municipal Trade Licence.

 

 

6 .Categories of weights and measures sold at present.

 

 

7.Registration Number of CST / Sales Tax /

Professional Tax / Income Tax:

 

 

8.Details of sales done in the last 5 years.

 

 

9.Are you intending to import weights and measures etc from places outside the State / Country?  If so, indicate sources of supply

From the State(s) / Country(s). (Give details of manufacturer’s trade Mark/monogram and his licence number)

 

 

                    To be certified by the applicant

 

        Certified that I/We have read the Standards of Weights and Measures Act, 1976, the Standards of Weights and Measures (Enforcement) Act, 1985 and the Delhi Standards of Weights and Measures (Enforcement) Rules, 1988 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under.

        I/We have deposited the scheduled licence fees of Rs…………….(Rupees………….)  to the Sub-Treasury/Bank on…………. And the original challans is enclosed.

        All the information furnished above is true to the best of my/our knowledge.

Place:

                 Date:

                                                                                  Signature and Designation   

 

 

 

Schedule VI

(see rule 12(3)

Licensing Forms

FORM LM-3 

 

Office of the Controller of Legal Metrology

Government of NCT of Delhi

 

LICENCE TO MANUFACTURE WEIGHTS, MEASURES, WEIGHING INSTRUMENTS, OR MEASURING INSTRUMENTS                                                                                            

Licence No  ---------                                                                                            year-------

 

(I)  The controller of Legal Metrology hereby grant to (Name and address of party or parties ) a licence to manufacture the following :-

 

(Include details of the types of weights, measures, weighing instruments or measuring instruments that or licensed to be manufactured by the party )

 

(2)  The Licence is valid for the party named above in respect of his workshop located at :

(3) This Licence is valid from  31 December, 19

 

(4) The manufacturer shall comply with the conditions noted below, if he fails to comply with any one of these, his licence is liable to be cancelled.

 

(5)  The trade mark monogram being used by the manufacturer is as under,                                                                                                                                                                                                                                                                                                                                                                                                                                                Signature                                                                                                                Controller of Legal Metrology              

 

Date :

 

Place :-

 

Note :  In the case of firm, its name with the names of all person having any interest in the business should be given in paragraph 1

 

 

 

 

                                                

 

 

 

CONDITONS OF LICENCE (MANUFACTURER)

 

1.      The person in whose favour this licence is issued shall :

 

(a)      Comply with all the relevant provisions of the Act and Rules for the time being in force;

(b)      Not encourage or countenance any infringement of the provisions of the Act, or Rules for the time being in force;

(c)      Exhibit this licence in some conspicuous part of the premises to which it relates

(d)      Comply with any general or special directions that may be given by the Controller of Legal Metrology.

(e)      Surrender the licence in the event of closure of business and/ or cancellation of Licence;

(f)        Present the weights, measures, weighing or measuring instruments as the case may be, manufactured and meant for use within the State, to the Inspector for verification and stamping before sale;

(g)      Present the weights, measures, weighing or measuring instruments as the case may be manufactured and meant for use outside the State and covered under the First Schedule of the Inter State Verification and Stamping Rules, 1987, to the Inspector for verification and stamping before sale and

(h)      Submit the application for renewal of this licence, as required under the rules before at least thirty days of the date of expiry of the validity of the licence.

 

 

2.      Every condition prescribed after the issue of this licence shall, if notified in the official Gazette, be binding on the person to whom the licence has been granted.           

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Schedule VI

(see rule 12(3))

Licensing Forms

FORM LR-3

 

Office of the Controller of Legal Metrology

Government of NCT of Delhi

 

LICENCE TO REPAIR WEIGHTS, MEASURE, WEIGHING INSTRUMENTS, OR MEASURING INSTRUMENTS.

 

Licence No.  ------------                                                          Year: --------------

 

(1)  The Controller of Legal Metrology hereby grants to

      (Name and address of party or parties) a licence to repair the following:

 

(Include details of the types of weights, measures, weighing instruments or measuring instruments that are licensed to be repaired by the party)

(2)  The Licence is valid for the party named above in respect of his workshop located at:

(3) This Licence is valid from            31 December, 19

(4) The repairer shall comply with the conditions noted below, If he fails to comply with any one of these, his licence is liable to be cancelled

(5)  The party is licensed to repair weights,

measure, weighing and measuring instrument in the areas mentioned below:-

 

                                                         

   Signature

                                                             Controller of Legal Metrology

 

Date:

Place:

 

Seal

 

Note:  In the case of firm, its name with the names of all person having any interest in the business should be given in paragraph 1.

 

 

 

 

 

 

 

 

 

 

CONDITIONS OF LICENCE (repairer)

 

1.         The person in whose favor this licence is issued shall:

     

(a)    Comply with all the relevant provisions of the Act and Rules for the time being in force;

(b)    Not encourage or countenance any infringement of the provisions of the Act, or the Rules for the time being in force

(c)    Exhibit this licence in some conspicuous part of the premises to which it relates;

(d)    Comply with any general or special directions that may be given by the Controller of Legal Metrology

(e)    Surrender the licence in the event of closure of business and/or cancellation of Licence;

   (f)

 (i)  Present the Weights, measures, weighing  or measuring instruments as the case may be, duly repaired to the Inspector for under taking verification and stamping as specified in rule 14(1), before delivery to the user;

(ii)  In the case of weights, measures, weighing or measuring instruments, if they are services/repaired before the date on which the verification falls due and where in the process and the verification stamp of the Inspector is defaced, removed or broken, they shall be presented duly repaired to the Inspector for re-verification and stamping before delivery to the user.

(g) Submit the application for renewal of this licence, as required under the rules before at least thirty days of the date of expiry of the validity of the licence.

2.         Every condition prescribed after the issue of this licence shall, if notified in the Official Gazette, be binding on the persons to whom the licence has been granted.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Schedule VI

(See rule 12(3))

Licensing Forms

FORM LD-3

 

Office of the Controller of Legal Metrology

Government of NCT of Delhi

 

LICENCE TO A DEALER IN WEIGHTS, MEASURE, WEIGHING INSTRUMENTS, OR MEASURING INSTRUMENTS

 

Licence No.  ----------                                                       Year:------------

 

(1)    The Controller of Legal Metrology hereby grants to (Name and address of party or parties)

 a licence to deal the following:-

(Indicate details of the types of weights, measures, weighing instruments or measuring instruments that are licensed to be manufactured by the party)

(2)    The Licence is valid for the party named above in respect of his workshop located at:

(3)    This licence is valid from     31 December, 19

(4)    The dealer shall comply with the conditions noted below, If he fails to comply with any one of these, his licence is liable to be cancelled

(5)    The trade mark monogram being used by the manufacturer is as under,

 

 

                                                        Signature

                                                        Controller of Legal Metrology

 

Date:

Place:

 

 

Seal

 

Note:  In the case of firm, its name with the names of all person having any interest in the business should be given in paragraph 1

 

 

 

 

 

 

                                      

 

 

 

CONDITIONS OF LICENCE (dealer)

 

1.      The person in whose favour this licence is issued shall:-

 

(a)    Comply with all the relevant provisions of the Act and Rules for the time being in force

(b)    Not encourage or countenance any infringement of the provisions of the Act, or the Rules for the time being in force

(c)    Exhibit this licence in some conspicuous part of the premises to which it relates

(d)    Comply with any general or special directions that may be given by the Controller of Legal Metrology

(e)    Surrender the licence in the event of closure of business and/or cancellation of Licence

(f)      Submit th4 application for renewal of this licence, as required under the rules before at least thirty days of the date of expiry of the validity of the licence

(g)    Not sell, or offer, expose or possess for sale any non standard weight or measure

 

2.      Every condition prescribed after the issue of this licence shall, if notified in the Official Gazette, be binding on the persons to whom the licence has been granted.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                                                 SCHEDULE VII

                                                                   (See rule 12(5)

Licensing and Renewal Fees for manufacturers or dealers of weights and measures

 

Manufacturers                                  Rs.500/- per year

 

Repairer                                           Rs. 100/-per year

 

Dealer                                              Rs.100/- per year

 

 

 

 

 

 

Schedule VII-A

                                                                   (See rule 12(5) A)

 

Fee for the alteration of licence                  Rs.50.00

Fee for the issue of duplicate license          Rs.10.00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SCHEDULE VIII

(see rule 12(6))

REGISTER OF LICENSED MANUFACTURERS/REPAIRERS/DEALERS IN WEIGHTS, MEASURES, WEIGHING INSTRUMENTS/MEASURING INSTRUMENTS

 

 

Office of  ------

 

Licence Number

Date of Issue / /renewal 

Name and complete address of manufacturer/repairer/dealer

Place where workshop/ factory  is located 

Articles to be  manufactured repaired/ sold

(1)

(2)

(3)

(4)

(5)


 

 

Trade mark / monogram-me being used

Orders regarding cancellation-n of licence

Result of appeal

Signatures of competent authority

Remarks

(6)

(7)

(8)

(9)

(10)

 

 

 

 

 

 

 

Note Column (4) does not apply to dealers

Column (6) does not apply to repairers and dealers

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SCHEDULE IX
(See rule 12(7))

 

                                             Security deposit to be made by licencee repairer.

 

Repair of Weights and Measures excluding                                 [Rs.2500]1

Weighing and measuring instruments

 

Repairers of Weights and Measures including                             [Rs.5000]2

Weighing and measuring instruments

 

 

1 & 2 Subs. by notification dated 20th Dec. 2002;

 

 

 

 

SCHEDULE-X

(See rule-13(1))

Form :LM-4

 

REGISTER TO BE MAINTAINED BY THE MANUFACTURERS OF WEIGHTS AND MEASURES

 

1.      Name and address of the manufacturer

2.      Description of the weight or measures

3.      (i) No of the manufacturing licence:

(ii)Period of validity of the licence

4.      Particulars of order, if any suspending or revoking the licence

 

 

 

S.No.

Month

Unsold Stock From Previous month

Quantity  manufactured

during the

month

Total

Sold within the state

No. of items sold

Dispatch voucher no. and date

1

2

3

4

5

6

7

 

 

 

 

 

 

 


 

 

 

Sold outside the State

 

Total sold

Balance

Remarks

Name of the state

No of items sold

Dispatch voucher no. and date

 

 

 

8

9

10

11

12

13

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SCHEDULE X

(See rule-13(1))

FORM LR-4

 

REGISTER TO BE MAINTAINED BY THE REPAIRER OF WEIGHTS AND MEASURES

 

                                                                                                                    

1.  Name and address of the repairer                                                                                                         2. Licence No

3. Date of Licensing

 

S.No

Month

Name of the User from whom   

Received   

Items and their No.s booked for repairing

Receipt No.

and date of

issue to the

user

Amount of

Repairing

charges

Amount of

Verification

fee

Total amount

charges

Date of return to the user

Remarks

   1

   2

    3                

4

       5     

      6

        7

      8

      9

       10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SCHEDULE X

(See rule-13(1))

Form LD-4

 

REGISTER TO BE MAINTAINED BY THE DEALERS IN WEIGHTS AND MEASURES

 

1.      Name and address of the dealer

2.      Description of the Weight or measures

(i)Licence No.

(ii)Date on which licence was issued:

(iii)Period of validity of licence

(iV)Particulars of order, if any suspending or revoking the licence:

(V) Category of weight or measure

 

(Category A or B)

 

S.No.

Month

Unsold stock

From previous

month

Brought   From       Within   the State

during  the   month

 Brought   from   outside

  the State  during   the

   month

Total

   1

    2

        3

   4                

5

    6


 

 

 

 

 

Sold within the State

 

Sold outside  the State

 

Total

sold

Balance

Remarks

No. of items sold

 Despatch  Voucher           No and    Date

 

Name of the state

No. of items sold

Dispatch voucher no. and date

 

 

 

7

8

9

10

11

  12

13

14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SCHEDULE XI

(See rule 16(3))

CERTIFICATE OF VERIFICATION

 

Name of Inspector                                                                                                   No.

 

            I hereby certify that I have this day verified and stamped/rejected the under mentioned weights, measures etc. belonging to…………………………………….Locality………………………………..

(1)      Registration No as user………………………under the Standards of Weights and Measures (Enforcement) Act, 1985

 

 

Quantity

       Denomination

                        Weighing Instruments

Weights

Measures

Capacity

Class

Manufacture

Type

1

2

3

4

5

6

7

 

 

 

 

 

 

 

             

                                              

 

 

 

Measuring Instruments

Verification fee

Carriage Conveyance Adjusting

Charged etc.

8

9

10

 

 

 

 

 

 

 

 

 

 

                                                     Total Rs………………….Deposited vide T Receipt No/Money Receipt………dated…………

Repaired by

……………………….(Signature)

 

Next verification due on……………………………                                Inspector:

 

Note  1.  The certificate of Verification is to be exhibited in accordance with the procedure laid down in rule23:

         2.  In the case of rejected weights, measures, etc. the inspector shall give separate certificate of rejection, mentioning the     reasons for rejection against each item.

 

 

 

 

 

 

 

[Schedule XII]1

(See rule 17(1))

[substitute by notification dated 12th April 2005]

FEE PAYABLE FOR VERIFICATION AND STAMPING OF WEIGHTS MEASURES AND WEIGHING AND MEASURING INSTRUMENTS

 

 

SCHEDULE XIII

(See rule 25(1))

 

Form of appeal against an order of an Inspector/Assistant Controller/Deputy Controller/Controller

 

 

1.         Name and address of the appellant

2.         No. and date of the order of the Inspector/Assistant Controller/Deputy   Controller/Controller of Legal Metrology against which the appeal is preferred (enclose copy of the order)

3.         Whether the appellant desires to be heard in person or through an authorized representative.

4.         Grounds of appeal.